Husaini® Engineers offers multi-gas leak detectors like Ammonia Gas Detector and Chlorine Gas Detector which can be installed in control room with sensor located in field. Gas Leak Monitor can have maximum seven channels with individual power supplies. Each channel can be connected to sensor which can be same gas or different gas (either toxic or combustion).
Monitor is built into protective rigid aluminum case with detachable PCB with display integrity The digital display allows visibility of gas concentration and LED indicators are found below the digital meter for alarm purpose. The red switch is for alarm accepts locally with remote facility is also as mounted to a single printed circuit board.
The instrument unit is designed for panel mounting in any field where suitable power supply is available the control unit can be powered from 230V A.C; 50 Hz single phase (Sensor and Alarm are internally powered from Control unit) dimensions and fixing information for mounting the monitor has shown above with four holes. Each card can be interchangeable with preset alarm adjustable over full range.
Same gas or different gas sensor can be used. All cards in rack are interchangeable.Individual for each sensor potential free contact output two nos.
Recorder output 4 to 20 mA to interface DCS/PLC.Digital Display of gas measuring in LED 3.5 digit. Common Alarm or remote alarm facility
